Skip to content

Maillon Rapide Yeti Rigging Connector

£14.99

Category:

Maillon Rapide Rigging Link

The Connector manufactured by Peguet (Maillon Rapide) as ofte used with the lightweight Yet harnesses for connecting harness to dyneema risers or narrow dyneema webbing harness reserve attachment points to dyneema rope bridle.

The best strength/weight connector on the market, manufactured in France by Peguet.

Ideal for any application calling for reliable strength, smallest size and lightest weight.

NOTE: Steel maillons are stamped with a “Working Load Limit” (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers.

WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done with fingers. A spanner may be used carefully, just give them a ‘nip’. Threadlock compound or liquid is not recommended.

SWL: 325kg
WWL: 1625kg (minimum breaking load)

Weight: 25g
Internal length: 51mm
Total length: 61mm